Table des Matières
Publicité
Filling the clean-water tank
The TTB 4055T / TTB 4552T is equipped with a 40 litre clean-water tank allowing large areas to be cleaned in a
single fill.
26
Great care must be taken to ensure that contaminants (leaves, hair, dirt, etc)
Machine Set-Up
To fill the clean-water tank, use the FLEXI - FILL
pipe from either a tap or hose pipe (Fig.26).
The large cap can also be unscrewed for filling
from a bucket or suitable container.
Fill the clean-water tank to a maximum of 40
litres, including cleaning chemicals if required.
Follow chemical manufacturing guide lines.
The clear Dump hose at the rear of
the machine can be used to see the
level of the clean water.
are not allowed to enter the clean-water tank during the filling process.
If using a bucket or similar, ensure it is always clean and free from debris.
MAX
Note:
28
Publicité
Table des Matières
