Table des Matières
Publicité
Control of Substances Hazardous to Health (COSHH)
For best results use a non-foaming type of chemical, dilute to the manufacturers specification.
For further guidance on hazardous substances refer to health and safety instructions online.
Visit
http://www.hse.gov.uk/
!
Always ensure that chemical manufacturer's safety guidelines are followed.
Only use chemicals recommended for use in auto scrubber-dryers.
Pre-cleaning advice.
Before performing the cleaning operation, place out
appropriate warning signs and sweep or dust-mop the
floor (Fig.27).
Numatic part (629044) Wet Floor sign
(available if required)
Pre-scrub mode
The TTB 4055T / TTB 4552T has been designed to cope with a variety of floor types and different levels of soiling.
On heavily soiled floors use a 'double scrub' technique.
First pre-scrub the floor with the floor-tool in the raised position, allow the chemical time to work, then scrub the area a
second time with the floor-tool lowered.
Machine Operation
for UK information.
WHEN HANDLING AND MIXING CHEMICALS
Ref to (Page.26) to raise and lower the floor-tool.
27
30
!
Publicité
Table des Matières
