Options And Accessories - Hatco CWB-S Série Manuel D'installation Et D'utilisation

OPTIONS AND ACCESSORIES

Pan Support Bars
Accessory pan support bars are available to divide wells into
sections for different size pans.
CWB12BAR .......... 12" (305 mm) Pan Support Bar
12" (305 mm)
Pan Support Bar
Pan Support Bars in Model CWB-S3
Food Pans
Accessory stainless steel food pans are available in various
sizes.
ST PAN 1/3 ............ Third-size stainless steel pan — 12-3/4"W
x 6-7/8"D x 2-1/2"H (324 x 175 x 64 mm)
ST PAN 1/2 ............ Half-size stainless steel pan — 12-3/4"W x
10-3/8"D x 2-1/2"H (324 x 264 x 64 mm)
ST PAN 2 ............... Full size stainless steel pan at 2-1/2"
(64 mm) deep — 12-3/4"W x 20-3/4"D x
2-1/2"H (324 x 527 x 64 mm)
ST PAN 4 ............... Full size stainless steel pan at 4"
(102 mm) deep — 12-3/4"W x 20-3/4"D x 4"H
(324 x 527 x 102 mm)
HDW 6" PAN ......... Full size stainless steel pan at 6"
(152 mm) deep — 12-3/4"W x 20-3/4"D x 6"H
(324 x 527 x 152 mm)
1/3 Pan, 2-1/2" (64 mm)
Deep
Full Pan, 2-1/2" (64 mm)
Deep
Full Pan, 6" (152 mm) Deep
Stainless Steel Food Pans
1/2 Pan, 2-1/2" (64 mm)
Deep
Full Pan, 4" (102 mm)
Deep
Slanted Base Option
Slanted bases are options available for all models. The slanted
base gives the well a 5° tilt.
NOTE: Water will not completely drain from unit with slanted
base installed.
1. Lift the unit and slanted base out of the shipping frame,
and carefully lower them into the countertop cutout. This
step requires two or more people, depending on the unit.
• The slanted base is not attached to the unit. Make sure
to lift the unit and the slanted base together out of the
shipping frame.
2. Apply National Sanitation Foundation-approved (NSF-
approved) silicone sealant around the edge of the unit to
seal it to the slanted base.
3. Apply NSF-approved silicone sealant around the edge of
the slanted base to seal it to the countertop.
4. Follow the appropriate plumbing and electrical procedures
in the INSTALLATION section.
Installing a Slanted Base
Four Year Extended Parts Warranty
A four year extended parts warranty on the compressor is
available at time of purchase. This warranty begins after the
standard one year warranty expires.
Factory Installed Gasket
A factory installed gasket is available as an option for all
models. The factory installed gasket eliminates the need for
silicone sealant during installation.
14
English
Slanted
Base
Countertop
Cutout
Form No. CWBSM-1120