Troubleshooting Guide; Options And Accessories - Hatco KSW-1 Manuel D'installation Et D'utilisation

English
WARNING
This unit must be serviced by qualified personnel only.
Service by unqualified personnel may lead to electric
shock or burn.
Symptom
Unit turned "On", but no heat.
Unit not hot enough.
Unit not working at all.
Troubleshooting Questions?
If you continue to have problems resolving an issue, please contact the nearest Authorized Hatco Service Agency or Hatco for
assistance. To locate the nearest Service Agency, log onto the Hatco website at www.hatcocorp.com, select the Support pull-
down menu, and click on "Find A Service Agent"; or contact the Hatco Parts and Service Team at:
Telephone: 800-558-0607 or 414-671-6350
e-mail: support@hatcocorp.com
General
The following accessories are availbale for Sauce Warmers.
3VBOTTLE .................3-valve, 1 quart (1 L) sauce bottle
1VBOTTLE .................1-valve, 1 quart (1 L) thick sauce bottle
Form No. KSWM-0120
Probable Cause
Heating element(s) defective.
Temperature Control defective.
Temperature Control setting too low.
Heating element(s) defective.
Unit not turned on.
Unit not plugged in.
Circuit breaker tripped.
Temperature Control defective.

TROUBLESHOOTING GUIDE

ELECTRIC SHOCK HAZARD: Turn OFF power switch,
unplug power cord, and allow unit to cool before
performing any cleaning, adjustments, or maintenance.
Contact Authorized Service Agent or Hatco for assistance.
Turn Temperature Control clockwise to increase the
temperature setting.
Contact Authorized Service Agent or Hatco for assistance.
Review the "Operating the Unit" procedure in the
OPERATION section of this manual.
Plug unit into proper power supply.
Reset circuit breaker. If circuit breaker continues to trip,
contact an Authorized Service Agent or Hatco for assistance.
Contact Authorized Service Agent or Hatco for assistance.

OPTIONS AND ACCESSORIES

9
WARNING
Corrective Action