Instrument General Settings - Viscount Chorale 2 Mode D'emploi

Chorale 2 - Chorale P31
Viscount

7. INSTRUMENT GENERAL SETTINGS

All the organ's general setup functions, i.e. the settings not strictly linked to the voices or the MIDI
interface, are found in the SET UP submenu recalled by selecting the field of the same name on the
display in the SETTING MENU. The first video page displayed is as follows:
Since there are a large number of settings, the menu is displayed on three screens. Scroll the cursor
downwards to display the other functions in the list:
_______òäô õï______¿
EXT. OUT ROUTER
EXT. OUT VOLUME
KEYBOARD SETTING
The following is a short description of the various settings:
o TREMULANT: setting of the Tremulants for each manual.
o REVERBERATION: selection of the type of reverb required.
o EQUALIZER: for the equalizers adjustment.
o EXT. OUT ROUTER: routing of the manuals and pedal board on the audio outputs [OUTPUT 1]
and [OUTPUT 2].
o EXT. OUT VOLUME: regulates the volume of the audio outputs.
o KEYBOARD SETTING: manual operation settings.
o PREV/NEXT PISTONS: operation of the [PREV] and [NEXT] pistons.
o FUNCTION STORED: combination fixing settings.
As usual, use the [FIELD
screens of the functions required. Press [EXIT] to return to the SETTING MENU.
_______òäô õï______Ö
TREMULANT
REVERBERATION
EQUALIZER
] and [FIELD ] buttons to move the cursor and [ENTER] to display the
_______òäô õï______Ñ
KEYBOARD SETTING
PREV/NEXT PISTONS
FUNCTION STORED
56
Owner's Manual