Viscount Chorale 2 Mode D'emploi page 44

Chorale 2 - Chorale P31
Viscount
4. Display: alphanumeric display with 20 characters on 4 lines
for display of all the screens relating to the organ's functions.
5. [FIELD ] and [FIELD ] buttons: buttons used to move
the cursor around within the display screens. The [FIELD ]
button moves the cursor to the field above (the one currently
selected) while [FIELD
6. [VALUE +] and [VALUE -] buttons: buttons for adjusting
parameters. [VALUE +] increases the value, [VALUE -]
decreases it.
7. [EXIT] and [ENTER] buttons: buttons for accessing or
exiting menu screens. [ENTER] is used to enter the menu or
function shown on the display or confirm any prompts from
the system. [EXIT] is used to exit the screen on the display
and return to the previous one, or abort any prompts from the
system.
8. [GENERAL] trimmer: regulates the organ's general
volume.
9. [REVERB] trimmer: regulates the level of the reverb digital
effects.
10. [PEDAL] trimmer: pedal board volume.
11. [MAN. I] trimmer: first manual volume.
12. [POWER ] Switch: the switch used to switch the organ on
and off.
13. Lectern lights potentiometer (Chorale P31 only).
WARNING!
Do not switch the organ on and off in rapid succession. After
the instrument is switched off, wait at least 10 seconds before
switching it back on.
] selects the field below.
42
Owner's Manual
4
+
FIELD VALUE
5
-
FIELD VALUE
6
Chorale 2
8 9
10 11
Chorale P31
8
10
13
ENTER
7
EXIT
12
9
11
12