Appendix; Demonstration Songs; Voice Local Off - Viscount Chorale 2 Mode D'emploi

Owner's Manual
Once the Factory Setting operation has been started, the display will show a standby screen for the time
taken to reload the factory data:
after which the instrument will be rebooted automatically.

10.1 DEMONSTRATION SONGS

The organ has a number of demonstration (demo) tracks to allow you to fully appreciate the quality its
sound qualities and/or those of the changes you have made.
To recall playback of the demo tracks, select the DEMO option from the SETTING MENU.
Use the [FIELD ] and [FIELD
stop each piece. Press [EXIT] to leave the DEMO SONG function.

10.2 VOICE LOCAL OFF

Setting a voice in Local Off mode means that it will not be played by the organ's internal sound generation
system, but the relative MIDI (System Exclusive) message will be transmitted, so that it can be turned on
and played on a connected instrument.
To set a voice Local Off press the [S] (Set) button, keep it pressed and also press the [C] (Cancel) button.
All the draw-stops will come on and the display will show the video page:
To set a voice in Local Off mode, press its draw-stop so that its light goes out.
After setting the setup required, press [S] and [C] together to save it.
Accessing the Local Off setting function after this will trigger display of the status of the voices as
follows:
- Light on: voice in Local On mode (plays with internal generation)
- Light off: voice in Local Off status
During normal operation, when a voice in Local off mode is switched on, the draw-stop flashes three
times then remains constantly lit.
__ãÜàôîóü SETTING___
PLEASE WAIT..

10. APPENDIX

] buttons to select each piece of music. Press [ENTER] to start and
_SOUND ëîàÜ ë îì/îãã_
PRESS SET+CANCEL
FOR SETTING
69
Chorale 2 - Chorale P31
Viscount