Programs; Quick Start; End Your Workout; Save&Exit - Tunturi Pure U bike 6.1 Mode D'emploi

Programs

• Turn the jog wheel and select

"Quick start"

• Press the jog wheel to confirm and
enter the workout screen quickly
Workout screen
The X axis denote time in minutes
between 0~30. It is updated once every
15 minutes during workout
• During workout, press the jog wheel
button to switch the Y-axis between
Nm↔ bpm.
• The bar chart denotes torque value
Nm. Rotate the jog wheel to adjust
the Nm value.
• The white dot line shows current
position, which moves rightward as
workout time increases. The workout
screen could show 5-hour data at
most.
• The orange curve shows the user's
actual heart rate, which varies as the
heart rate frequency goes up and
down.
12
Quick start

End your workout

The workout end screen pops up when
Back/stop or Main menu is pressed or
when the white dot line reaches the
target value.
Workout end screen
Continue:
Choose "Continue" to return to workout
screen
Exit:
Choose "Exit" to exit to last session
screen.
Save&Exit:
Choose "Save&Exit" and enter a file
name at the bottom of the screen: use
the jog wheel to select A~Z or 0~9, save
all workout data and name the file for a
new workout mode.
Display the workout data in Last session
screen.
Workout data screen
Press the jog wheel button to return to
main menu.