Inserting The Telescopic Tube; Adjusting The Length Of The Telescopic Tube; Accessories - Cleanmaxx CP-CY4207EP-7 Mode D'emploi

Inserting the Telescopic Tube

1. Insert the curved end of the suction hose into the larger opening
2. Insert the other end of the telescopic tube into the desired

Adjusting the Length of the Telescopic Tube

1.
A
2. Release the slide and move the tube slightly up or down until

Accessories

CAUTION!
❐ Always switch off the vacuum cleaner fi rst before changing the nozzles.
The nozzles can be attached either to the telescopic tube or directly to the
handle.
Floor Nozzle
The fl oor nozzle is suitable for both carpets and hard fl oors.
B The foot switch (B) allows you to change between carpet and hard
fl oor. A brush and a rubber lip are extended on the underside of the
nozzle for use on hard fl oors.
08059_DE-GB-FR-NL_V3.indb 22 08059_DE-GB-FR-NL_V3.indb 22
of the telescopic tube. To ease insertion, twist the tube slightly
back and forth.
nozzle.
Press the slide (A) on the telescopic tube downwards and
adjust the tube to the desired length.
it engages.
22
29.10.2014 09:29:41 29.10.2014 09:29:41