Ordering New Filters; Troubleshooting - Cleanmaxx CP-CY4207EP-7 Mode D'emploi

Ordering New Filters

You can order a new HEPA, dust and motor fi lter at: www.service-shopping.de

Troubleshooting

Should your device stop working at any time, exhibit signs of damage or require a spare
part, please contact the customer service department. For your own safety, do not
attempt to carry out repairs yourself.
The following table contains tips on how you can remedy small problems yourself:
Problem
The device generates no
suction.
Low suction force.
Dust escapes from the
device during cleaning.
Unusual odour
08059_DE-GB-FR-NL_V3.indb 27 08059_DE-GB-FR-NL_V3.indb 27
Possible cause / solution
Ensure that the plug is correctly inserted into the
plug socket.
• Is the exhaust air valve in the handle open?
Close it.
• Adjust the suction strength on the suction
strength control.
• Is the dust container full (MAX marking
reached)? Empty the dust container.
• Is one of the fi lters heavily soiled? Clean it.
• Is the nozzle, the telescopic tube or the suction
hose clogged? Pull out the mains plug and
clear the clogging.
• Is the dust fi lter seated correctly in the dust
container? Is the dust container closed
correctly and inserted in the device? Is the
dust container cover closed correctly? Correct
this if necessary.
• Is one of the fi lters heavily soiled? Clean it.
A new odour is normal when the device is used for
the fi rst time; it disappears after a while.
27
29.10.2014 09:29:43 29.10.2014 09:29:43