Prior To Fi Rst Use; Unpacking The Product Contents; Inserting/Removing The Suction Tube; Inserting The Telescoping Tube - Cleanmaxx PC-C001-5 Mode D'emploi

Masquer les pouces Voir aussi pour PC-C001-5:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Prior to fi rst use

Unpacking the product contents

ATTENTION!
❐ Keep children and pets away from the packaging. Risk of suffocation!
Unpack all parts and make sure that the product contents are complete (see section
"Product contents and product overview") and check for any transport damage. If any
components are damaged, do not use them(!). Instead contact our customer service.

Inserting/removing the suction tube

B
A
s

Inserting the telescoping tube

1. Insert the end of the suction tube in the port (A) on the
front of the device. It must audibly lock into place.
2. To remove the suction tube, you must depress and hold
the two release buttons (B) on the end of the tube and pull
out the tube at the same time.
1. Insert the handle in the straight end of the telescoping
tube. For better seating, gently turn the tube back and
forth in the process.
2. Insert the tapered end of the telescoping tube in the desi-
red nozzle (see also section "Accessories"). For better
seating, gently turn the tube back and forth in the process.
3. If not in use, you can attach the tile and brush nozzle to
the bracket provided on the handle as shown.
18

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Z 08749

Table des Matières