Operation - Cleanmaxx CP-CY4207EP-7 Mode D'emploi

Upholstery Nozzle
Crevice and Brush Nozzle

Operation

CAUTION!
❐ Never hold the nozzles, the handle or the telescopic tube close to parts of your
body, hair or animals during use. They could become stuck to the device. Should
the vacuum cleaner become stuck, press the On/Off button immediately to switch
off the device.
❐ Switch on the vacuum cleaner only when you have checked that all the parts have
been properly attached, and that the dust container and the fi lters have been correctly
inserted and are completely dry.
❐ On no account should the device be used to suck up the following:
– Liquids or wet substances (e. g. wet carpet shampoo)
– Glowing ash, cigarette ends, matches, etc.
– Infl ammable or explosive substances
– Very fi ne dust (e. g. concrete dust), ash or toner
– Pointed, hard objects such as large shards of glass
❐ Note the MAX marking on the dust container. If the marking is reached during
use, empty the dust container before you carry on vacuum cleaning (see also the
"Cleaning" chapter, "Emptying the Dust Container" section).
The handle has an exhaust air valve with which you can quickly reduce the
suction force if necessary. Open the valve when cleaning curtains, rugs or other
light, mobile items. Otherwise you should keep the valve closed.
08059_DE-GB-FR-NL_V3.indb 23 08059_DE-GB-FR-NL_V3.indb 23
The upholstery nozzle is suitable for cleaning all kinds of upholstery,
e. g. sofas, car seats etc.
Fold over the end piece in the direction of the arrow to convert the
crevice nozzle into a brush nozzle:
• The crevice nozzle is suitable for upholstery, cleaning the inside
of cars and for all nooks and crannies that cannot be reached
with the other nozzles.
• The brush nozzle is suitable for all uneven objects, furniture,
lamps, profi les and skirting boards, window ledges, etc.
23
29.10.2014 09:29:42 29.10.2014 09:29:42