RECOMMENDATIONS FOR USE
Important
The rate of accidents deriving from the use
of appliances depends on many factors
which cannot always be foreseen and con-
trolled. Some accidents may be caused by
unpredictable environmental factors, while
others are due above all to the behaviour of
users. As well as receiving authorisation
and appropriate instruction, if necessary,
the first time they use the appliance, users
must carry out a few simulated practice op-
erations in order to get to know the controls
DESCRIPTION OF CONTROLS
Rear burner marker
A
Minimum power
Top heating
element marker
marker
Full power
Bottom heating
element marker
marker
Heating element marker
Pilot light marker
The appliance is fitted with the controls for use of its
main functions.
A)Top burner control knob: turns on and off and
regulates the corresponding top burner
B)Heating element control knob: for turning the oven
top or bottom heating element or both oven heating
elements on and off.
C)Temperature regulator knob: for regulating the
temperature inside the oven.
USE AND OPERATION
Off marker
A
and the main functions. Use only as intend-
ed by the constructor and never tamper
with any device to obtain performance lev-
els outside the rated specifications. Before
use, check that the safety devices are prop-
erly installed and in good working order. As
well as taking care to meet these require-
ments, users must also implement all safe-
ty regulations and read the description of
the controls and the start-up procedure
carefully.
Front burner marker
Rear burner marker
B
C
Temperature
marker
D)Temperature light: indicates that heating of the
oven is in progress, goes out when the set tempera-
ture is reached.
E)Mains light: indicates that the appliance is receiving
electrical power.
F) thermostat light: indicates that the safety thermo-
stat has tripped
- 9 -
Rear burner marker
F
E
A
B
C
A
IDM-39616600500.tif
4
B
D
IT
GB
DE
F
FR
D
E
ES
English