Symbols Explained; Declaration Of Conformity - Solo 550 Manuel D'utilisation

GB
Operating manual
Congratulations on choosing your new SOLO lawnmo-
wer, and we hope that you will be satisfied with this
advanced equipment. Your 550 lawnmower represents
a very competent machine offering the best pre-requisi-
tes for a first class lawn.
The SOLO lawnmower is designed for the mainte-
nance of grass and lawn areas. operate with special
care and caution when using this equipment in public
areas, parks, sporting venues, near roads and in horti-
culture and forestry.
These operating instructions are
accompanied by type-specific engine
operating instructions which are an essential
part of these operating instructions.
Before commencing any work with this equipment,
carefully read these operating instructions and make
yourself familiar with all controls and the correct use of
this SOLO lawnmower.
Observe all notes, explanations and regulations. Adhe-
rence to these operating instructions is a pre-requisite
for the appropriate use of this equipment. Never use
this lawnmower, whilst bystanders (particularly child-
ren) or animals are in close proximity of the equipment.
Users are liable towards third parties for any loss,
property damage or injury.
Wearing parts
Various components are subject to normal wear and tear and may require timely replacement, subject to type and
duration of use. The following wearing parts are excluded from the manufacturer's warranty: Lawnmower blades,
blade fixings, friction washers, deformed/bent crankshafts; wearing parts such as spark plugs, air filters; consumables
such as engine oil and/or gear oil.

Declaration of Conformity

SOLO Kleinmotoren GmbH, Stuttgarter Strasse 41,D-71069 Sindelfingen, certifies that the following
product in the version as supplied
Description of product:
Model/type description:
complies with the following EU guide lines: 98/37/EC for machines, 2000/14/EC and 89/336/EEC
(modified with 92/31/EEC) for electromagnetic compatibility. The following harmonised standards were
applied: EN 836; EN ISO 14982 / Conformity assessment procedure
Guaranteed sound power level (DIN45636):
Measured sound power level (DIN45636):
Testing location: SLG Prüf-und Zertifizierungs GmbH
Burgstätter Straße 20
D-09232 Hartmannsdorf
This Declaration of Conformity will become invalid if the product is modified, changed or altered wit-
hout prior approval.
Sindelfingen, 1 November 2005
SOLO Kleinmotoren GmbH
petrol push mower
550 / 550R / 550HR / 550RS
96 dB(A)
94 dB(A)

Symbols explained

Warning
Carefully read
the operating
instructions before
taking the machine
into use.
Wear protective
gloves during
maintemance and
repair work.
Wear ear defenders
Caution; fuel
Do not smoke
Avoid open flames
Wolfgang Emmerich
Managing Director
Keep bystanders
away from the
working area!
Before working
under the cutting
deck, remove the
spark plug cap.
Engine stop
Start-up
Observe mowing
times [applicable in
some countries]
Appendix VI