Spray Attachment - Stihl RE 95 Notice D'emploi

English
1 Handle
The handle is used when carrying and moving the
pressure washer.
2 Hose reel
The hose reel is used to roll up the high-pressure hose.
3 High-pressure hose
The high-pressure hose transports the water from the
high-pressure pump to the spray gun.
4 Connector
The connector connects the high-pressure hose with the
spray gun.
5 Holder
The holder is used to store the spray gun.
6 Holder
The holder is used to store the spray attachment.
7 Carrying handle
The carrying handle is used to carry the pressure
washer.
8 Connector
The connector is used to connect the water hose.
9 Rocker switch
The rocker switch is used to switch the pressure washer
on and off.
10 Crank
The crank is used to turn the hose reel
11 Holder
The holder is used to store the connecting cord.
12 Connecting cord
The connecting cord connects the pressure washer to
the mains plug.
13 Clip
The clip attaches the mains plug to the coiled connecting
cord.
14 Mains plug
The mains plug connects the connecting cord to a
socket.
38
15 Connector
The connector is used to connect the high-pressure
hose.
16 Compartments
The compartments are used to store the supplied
nozzles.
17 Holder
The holder is used to store the spraying set.
18 Connector
The connector connects the high-pressure hose with the
spray gun.
19 Cleaning pin
The cleaning pin is used to clean the nozzle.
# Rating plate with serial number
3.2

Spray attachment

1 2
13
14
12
15
1 Latch
The latch holds the nozzle in the spray lance.
2 Spray lance
The spray lance connects the spray gun with the nozzle.
3 Overview
3 4 5
7
9
6
11
10
8
0458-815-9621-A