Description Of The Appliance; Features; Identification Of The Main Components; Installation - Olimpia splendid AQUARIA S1 20-24 P Instructions Pour L'installation, L'emploi Et L'entretien

1 - DESCRIPTION OF THE APPLIANCE

1.1 - FEATURES

The appliance is packaged singularly in a cardboard packaging.
Store the packaging in vertical position.
The dehumidifier powerfully removes moisture from the air to decrease the humidity level of the room
and keep the indoor air dry and comfortable.
It is possible to select the desired level of humidity by means of the digital humidistat.
Thanks to the timer, it is possible to set the automatic switching on and off of the appliance.

1.2 - IDENTIFICATION OF THE MAIN COMPONENTS

1. Front shell
2. Air outlet grid
2a. Flap
3. Handle
4. Control panel
4a. Upper display
4b. Front display
5. Air inlet grid
6. Back shell
7. Water tank

2 - INSTALLATION

2.1 - APPLIANCE TRANSPORT

• Transport and handling of the appliance must be carried out in vertical
position.
If it is transported in a horizontal position, wait at least one hour before
starting it.
• Before moving or transporting the appliance, completely drain conden-
sation by working as described in paragraph 3.4.a
CAUTION
Transporting the appliance on delicate floors (for instance: wooden floors):
• Completely drain condensation.
• Pay particular attention while moving the appliance since the wheels may
mark the floor. Although the wheels are made from a rigid material and are
swivelling, they could get damaged by use or excessive dirt.
It is recommended to check that the wheels are clean and that they can
move freely.
(Fig.A)
8. Wheels
9. Supply cord
10. Filter
10a. Active carbons filter
10b. HEPA filter
11. Data plate
12. Instruction booklet
13. Condensation drain connection
14. Hose for continuous condensation drain
EN - 15
AQUARIA S1 20/24 P