Dräger X-zone 5500 Notice D'utilisation page 48

Establishing a wireless connection
4.2.5 Remove X-zone from a group
NOTICE
i i
If the last group device is removed from the group, the
whole group is terminated automatically.
1. If necessary, disable group monitoring provisionally (see
Chapter 4.2.7 on Page 48).
2. Position group device to be removed next to the main
device.
3. Press the key on the main device to open the menu.
OK
4. Select and confirm .
5. Select and confirm
Display on main device:
Grouping LED:
red-green flashing quickly.
Display on the group device:
Grouping LED:
green flashing quickly.
6. Press the key on the group device to be removed to
OK
remove the X-zone from the group.
Grouping LED on removed group device: off.

7. Press key on the main device.
OK
Grouping LED main device: lit in red-green.

Grouping is completed.

48
.
1:55
2
#1
4.2.6 Terminating group
1. Press the
OK
2. Select and confirm
3. Select and confirm
Display on main and group devices:
Grouping LED: off.
4.2.7 Provisionally disabling group monitoring
If group monitoring is provisionally disabled, the associated
device alarm function is provisionally disabled as a result.
The connection status display, the group assignment for the
devices and the forwarding of gas alarms are retained.
To disable the group monitoring provisionally:
1. Form group with closed wireless network.
04133112.eps
2. Press the
OK
3. Select and confirm
4. Select and confirm
provisionally.
Group monitoring is disabled.

Group monitoring is automatically activated 15 minutes after
provisional deactivation or after switching on grouped devices.
This interval is shown as follows:
For the first 13 minutes the communication LED flashes

slowly.
For the last 2 minutes the communication LED flashes

quickly.
NOTICE
i i
The gas alarms remain displayed if group monitoring is
04233112.eps
disabled.
4.2.8 Activating group monitoring
1. Form group with closed wireless network.
2. Press the
OK
3. Select and confirm
4. Select and confirm
Group monitoring is activated.

key on the main device to open the menu.
.
to ungroup the group.
ARCL-0144
key on the main device to open the menu.
.
to disable the group monitoring
key on the main device to open the menu.
.
to activate the group monitoring.
Dräger X-zone 5500 / 5800
04333112.eps