Dräger X-zone 5500 Notice D'utilisation page 47

Display on the group device:
Grouping LED:
lit in green.
8. Press the key on the main device to end the search
OK
process.
Grouping is completed.

Group monitoring is activated.

Display on main device:
Grouping LED:
lit in red-green.
9. If necessary, disable group monitoring provisionally (see
Chapter 4.2.7 on Page 48).
10. Set up devices at the location of use.
Dräger X-zone 5500 / 5800
#1
X-zone 1
04033112.eps
#0 2
2
05133112.eps
4.2.4 Adding X-zone to a group
1. Position the ungrouped X-zone next to the main device.
2. Press the key on the main device to open the menu.
OK
3. Select and confirm .
4. Select and confirm
group devices.
Display on main device:
Grouping LED:
red-green flashing slowly.
Display on the group device:
Grouping LED:
green flashing slowly.
5. Press the key on the required group device to add the
OK
X-zone to the group.
Grouping LED group device: lit in green.

6. Press the key on the main device to end the search
OK
process.
Grouping LED main device: lit in red-green.

Grouping is completed.

7. If necessary, disable group monitoring provisionally (see
Chapter 4.2.7 on Page 48).
8. Set up new group device at the location of use.
Establishing a wireless connection
to start the search process for
1:55
2
05233112.eps
03933112.eps
47