Dräger X-zone 5500 Notice D'utilisation page 46

Establishing a wireless connection
Explanation of wireless network menu symbols:
Show local measurements from the device
Local
(default display)
Show max. measurements of the group
Net
devices
Open group configuration
Config
Carrying out a connection test
Test
Open quick menu of the inserted X-am 5x00
Quick
Modbus Open status indicator from an external
module
Explanation of group configuration symbols:
Provisionally deactivating group monitoring
Activating group monitoring
Forming a new group/
Adding a device to the group
Removing a device from the group
Terminating group
4.2.2 Displaying group devices
1. Press the key on the main device to open the menu.
OK
2. Select Net to display
the group devices.
Legend:
1 Group device display
2 Local station number
3 Station number associated
with the measurement
display
4 Page display
5 Max. measurement
6 Gas name/unit
NOTICE
i i
For all gases, except for O
the group is displayed. The minimum value is
displayed for O .
2
46
1 2
#1
6
O Vol%
2
20.9
1
H S ppm
2
5
0
0
4
04433112.eps
, the maximum value within
2
4.2.3 Forming a new group
A maximum of 15 group devices can be assigned to a main
device. Group affiliation is saved in the corresponding
X-zone until the group is terminated.
To form a new group:
1. Gather all the devices for the group in one area.
2. Switch on the devices (see "Switching on the instrument"
on Page 41).
3. Select an X-zone as the main device.
4. Press the key on the main device to open the menu.
OK
5. Select and confirm
6. Select and confirm
group devices.
Display on main device:
Grouping LED:
red-green flashing slowly.
3
The grouping LED flashes green for all non-grouped X-zone
devices within range of the main device.
Display on the potential group device:
Grouping LED:
green flashing slowly.
7. For all required group devices, press the
succession to add the X-zone to the group.
.
to start the search process for
1:55
1
or
Dräger X-zone 5500 / 5800
03833112.eps
03933112.eps
key in
OK