Choke Knob; Recoil Starter Handle; Steering Friction Adjusting Screw - Yamaha 40V Manuel D'utilisation

EMC42210

CHOKE KNOB

Manual start model
Pulling out this knob (setting it to ON)
supplies a rich mixture required to start
the engine.
305043*
EMC44010

RECOIL STARTER HANDLE

(If equipped)
Pull the handle gently until resistance is
felt. Then vigorously pull the handle
straight out to crank the engine to start it.
209015
EMD00011
STEERING FRICTION ADJUSTING
SCREW(for Tiller control model)
A friction device provides resistance to
steering movement. This is adjustable for
operator
screw/bolt is located on the swivel bracket.
EMD00310*
408015
Adjustment
Resistance
Increase
Decrease
w
Do not overtighten the friction screw/bolt.
If there is too much resistance, it may be
difficult to steer, which could result in an
accident.
2-12
preference. An
Screw/bolt
Turn clockwise
Turn counterclockwise
GB
adjusting