Choke Knob - Yamaha 100A Manuel D'utilisation

EMC87011
Throttle friction adjusting screw
A friction device in the remote control box
provides resistance to movement of the
remote control lever.
This is adjustable for operator preference.
An adjusting screw is located at the front
of the remote control box.
701035
Resistance
Increase
Decrease
w
Do not overtighten the friction adjusting
screw.
If there is too much resistance, it may be
difficult to move the lever, which could
result in an accident.
702035
EMC42010

CHOKE KNOB

Pulling out this knob (setting it to ON)
supplies a rich mixture required to start
the engine.
NOTE:
The choke knob for Remote control model
has the same function as the choke switch
305033*
on the remote control box.
2-8
GB
Screw
Turn clockwise
Turn counterclockwise