Publicité
Les langues disponibles
Les langues disponibles
The last setting is shown on the display:
At first start the set production values appear, they are insignificant.
Temperature
Press the ON/OFF button. The display shows the current water temperature. Be care-
ful if you have set or degree Celsius or degree Fahrenheit.
By pressing the button "temperature +/-", you set the desired temperature (5 to 99
°C) in steps of 0,1 °C.
By pressing "+/-" longer, you can choose the temperature in the fast mode. Now
press time.
Time
By pressing the button "time +/-", you set the desired time (5 minutes to 99 hours)
in steps of 1 minute. By pressing "+/-" longer, you can choose the temperature in the
fast mode.
If you turn off the device with the "0/1" switch, plug it out, or if you have a
power outage, the unit remembers the last set values.
Start
Push the start button
symbol
for the running pump in the display. While the appliance is heating you see
in the display. If you want to stop the device then press
Water pump
∙ By starting the pump a slight noise sounds briefly.
∙ If the noise continues, this can be caused by impurities of broken bags sucked into
the pump. In this case clean the device (See cleaning), vacuum-seal the food again .
Seasoning
The food can be seasoned or have herbs added to it before vacuum packing.
Please take care when seasoning, since the food keeps its natural flavour during Sous-
Vide cooking.
14
35,7
water temperature
57,4
set temperature
3:01
set time
The pump and the radiator are running. You can see the
.
Publicité
