Assembly; Installing The Handle Bar; Install/Empty Grass Catchment Basket; Mulch Kit - Grizzly ERM 1642 Q-360 Traduction De La Notice D'utilisation Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 51
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the
functionality of active or passive
medical implants. To reduce the
risk of serious or lethal injuries, we
recommend that persons with medi-
cal implants consult their doctor and
the manufacturer of their medical
implant before operating the ma-
chine.

Assembly

Disconnect the plug before any
work on the equipment. There is a
risk of injury.

Installing the Handle Bar

For a simple holmm installation,
select cutting height 25 mm (see
„Adjusting the cutting height").
1. Slide the two ends of the lower
handle bar (3) into the receptor
on the mower housing.
2. Fix the lower bar using the sup-
plied wing screws (7).
D
3. Fasten the upper handle bar (1)
using the tensioning levers (13).
When both tensioning levers (13)
are loosened, the curved handle
can be folded down for storing the
equipment. Ensure that the power
cable is not caught.
Install/empty grass catchment
basket
Caution: Do not operate the
equipment with the grass col-
lection box or impact protection
installed incompletely. Risk of
injury!
Assemble grass catchment
basket:
1. Pull plastic loops (24) over bas-
ket rods (23).
Fixing the Grass Collection
Box onto the Equipment:
2. Lift up shock protection (4).
3. Hook the grass collection box
(10) into the mounting provided
for this on the rear of the equip-
ment. .
4. Release the impact protection
(4). It holds the grass collection
box in position.
Dismantling/Empty out the
Grass Collection Box:
5. Lift the impact protection (4) and
remove the grass collection box
(10).
6. Empty catchment basket (see
chapter „Disposal / Environmen-
tal Protection") and re-install it.

Mulch kit

Prior to using the mulch kit, the
lateral ejection canal has to be re-
moved (see
Attaching mulch kit
1. Remove the collection box
(
10), if used.
GB
).
29

Publicité

Table des Matières
loading

Table des Matières