Assembly; Assembling The Curved Handle; Assembling The Grass Box; Operation - Grizzly EM 1130 Traduction De La Notice D'utilisation Originale

GB

Assembly

Disconnect the plug before any
work on the equipment. There is a
risk of injury.

Assembling the Curved Handle

B
1. Insert the lower bar (3) into the
slot on the lawnmower housing
(6).
2. Fix the bar (3) using the en-
closed screws (13).
C
3. Fix the curved handle (1) using
the enclosed screws (14) and
the wing nuts (2) on the lower
bar (3). There are two possible
positions.
4. Clip the cable holder (8) into the
bar (3) and thus fix the cable.
When both wing nuts are loos-
ened, the curved handle can be
folded down for storing the equip-
ment. Ensure that the power cable
is not caught.

Assembling the Grass Box

D
1. Connect the two pieces of the
collection box (16).
2. Connect the handle (15) in one
of the two pieces of the collec-
tion box (16).
Do not work with the lawnmower
without the collision guard or
lawn box. There is a risk of in-
jury.
50

Operation

Hanging On/
Removing the Grass Box
1. To hang on the grass box (4), lift
E
the collision guard (7) and hang
on the grass box. Fold the col-
lision guard (7) onto the grass
box (4). It holds the grass box in
the correct position.
2. To remove the grass box (4),
lift the collision guard (7) and
detach the grass box. Fold the
collision guard (7) back onto the
mower housing (6).
Level gauge:
The level gauge (4a) is located on the
side of the grass catcher (4).
Flap open:
grass catcher empty
Flap closed:
grass catcher full

Adjusting the Cut Height

Switch off the equipment, discon-
nect the plug and wait for the blade
to stop. There is a risk of injury.
The lawn mower can be adjusted to the
following cutting heights by changing the
position of the wheels:
60 mm - Tall cutting height
40 mm - Medium cutting height
20 mm - Short cutting height
1. Unscrew the wheels (5).
F
2. Firmly re-secure the wheels