Electric Hood Connection; Unipotential Connection; Oven Positioning; Chimney Connection - OEM DOMITOR DM Mode D'emploi Et D'entretien

DOMITOR DM/DB
Installation and connections
3.3.b - Electric hood connection
Concerning electric hood connection, follow the instruc-
tions supplied with the hood.
3.3.c - Unipotential connection (Fig 7)
The equipment shall be inserted in a unipotential system,
whose effectiveness shall be veri f ed according to the
rules being in force.
A cascade connection shall be carried out among the
various oven components by using the screw (1) placed
on the rear oven side.
3.4 - OVEN POSITIONING (Fig 8)
The oven shall not be installed closed to in f ammable
walls such as furniture, partition walls, matchboar-
ded coatings etc... A safety range of at least 20 cms
from lateral and rear oven sides should be kept. No
inf ammable f ooring shall be utilized to install the
oven on it.
• The oven shall be positioned on the f nal area following
the indications reported in f gure 8, because they
indicate the minimum distances required to allow the
oven correctly to function.
• Fix the oven position by braking the rear wheels.
3.4.a - Chimney connection (Fig.9)
• Place the f tting (2) on the chimney (1).
• Connect the Ø 100 mm f tting (2) with a naturaldraught
conduit or a hood.

3.5 - FIRST STARTING

Once the oven is installed and before starting it,
carefully clean its inner part as well as refractory
surface as explained in "Maintenance" chapter , also
make sure neither foreign nor in f ammable bodies
are inside the oven.
• Turn on the oven as indicated in "Functioning" para-
graph and set the temperature of both crown plate and
bedplate at 300°C, making sure the set temperature
is reached as well as the different options depending
upon the concerned model are functioning.
DANGER
DANGER
FIG. 7
FIG. 8
FIG. 9
90
2
1
GB - 15