Oven Control Board - OEM DOMITOR DM Mode D'emploi Et D'entretien

Capitolo 5
5.1 - OVEN CONTROL BOARD (Fig 1)
FIG. 1
On the oven, there are the following control elements:
1. Line selector switch ON/OFF
If you turn it onto ON, it energizes the control ele-
ments, the lamp (7) as well as the lamp being inside
the oven light up.
2. Bedplate temperature adjustment thermostat
Turn the rotary knob and position it onto the bedplate
temperature you wish, to do it, please refer to the
graduated scale.
3. Bedplate resistance lamp
Lights up when the bedplate resistances are on, it
goes out when the oven reaches the set temperatu-
re.
GB - 18
4. Crown plate temperature adjustment thermo-
stat
Turn the rotary knob and position it onto the crown
plate temperature you wish, to do it, please refer to
the graduated scale.
5. Crown plate resistance lamp
Lights up when the bedplate resistances are on, it
goes out when the oven reaches the set temperatu-
re.
6. Analogue pyrometer
Indicates the actual oven temperature.
7. Oven starting pilot lamp
Lights up when the oven is started.
DOMITOR DM/DB
Functioning