DOMITOR DM/DB
Maintenance
6.1.c - Planned maintenance
6.1.c.a - Every 600 hours a careful chamber cleaning
(Fig
2)
•
Make sure the oven is totally cool, then open the door ,
remove the protection (1) unscrewing the relevant
screws and gently take off the refractory surface (2)
from the door . Remove all possible residues by a
vacuum cleaner.
• Clean
the f reproof surface by utilizing the special
brush.
ATTENTION
Carefully handle the refractory surface.
DO NOT wash with water , DO NOT wash in a dish-
washer, DO NOT utilize detergents to clean the
refractory surfaces, only use a wet cloth.
6.1.c.b - Every 2 years
•
Contact manufacturer's technical service to carry out
a comprehensive checking of the oven.
6.1.d - Maintenance in case of need
6.1.d.a - Lamp holder replacement (Fig 3)
This operation shall be carried out by a skilled
technician.
•
Remove the left-hand panel (1).
•
Unscrew both screws (2) and remove the square.
•
Remove the lamp and release the lamp holder by
operating the spring (3).
•
Replace the lamp holder and reassemble all by pro-
ceeding in the opposite way.
DANGER
FIG. 2
FIG. 3
1
2
2
3
GB - 23