Setting The Clock Manually - PERFECTPRO ROCKHART BT Mode D'emploi

Setting the clock manually

Your radio will set its clock automatically using the DAB or FM radio
signal. If no signal is available and you need to set the time
manually, please follow the procedure shown below. Please note
that the clock time can be set manually only when the radio is on.
. Press and hold the Menu button until the Advanced menu of the
current mode shows on the display.
2. Rotate the Tuning control until "System" appears on the display.
Press the Tuning control to enter the menu setting.
3. Rotate the Tuning control until "Time" shows on the display.
Press the Tuning control to enter the setting menu.
4. Rotate the Tuning control until "Set Time/Date" appears on the
display. Press the Tuning control to enter the setting.
5. Now the hour digits flash on the display. Rotate the Tuning control
to set the desired hour. Press the Tuning control to confirm the
setting.
6. Now the minute digits flash on the display. Rotate the Tuning
control to set the desired minute. Press the Tuning control to
confirm the setting.
2