Software Version - PERFECTPRO ROCKHART BT Mode D'emploi

Software version

The software display cannot be altered and is just for your
reference.
. Press the Standby button to switch on your radio.
2. Press and hold the Menu button until the Advanced menu of the
current mode shows on the display.
3. Rotate the Tuning control until 'System ' appears on the display.
Then press the Tuning control to enter the setting.
4. Rotate the Tuning control until 'SW version' appears on the display.
5. Press the Tuning control to enter the setting. The software version
shows on the display. Press the Menu button to exit the software
version display.
GB
39