Dynamic Range Control (Drc)-Dab - PERFECTPRO ROCKHART BT Mode D'emploi

Dynamic Range Control (DRC)-DAB

The DRC facility can make quieter sounds easier to hear when
your radio is used in a noisy environment.
There are three levels of compression:
DRC Off No compression applied.
DRC High Maximum compression applied.
DRC Low Medium compression applied.
. Press the Standby button to switch on your radio.
2. Press the Source button until the DAB band is selected.
3. Press and hold the Menu button until the Advanced DAB menu
shows on the display.
4. Rotate the Tuning control until 'DRC ' appears on the display.
Press and release the Tuning control to enter the setting. The
display will show the current DRC value which will be marked
with an asterisk.
5. Rotate the Tuning control to select the required DRC setting.
6. Press the Tuning control to confirm the setting. After several
seconds the display will return to the normal radio display.
Note:
Not all DAB broadcasts are able to use the DRC function. If the
broadcast does not support DRC, then the DRC setting in the radio
will have no effect.
GB
9