Scan Sensitivity Setting-Fm - PERFECTPRO ROCKHART BT Mode D'emploi

Scan sensitivity setting-FM

Your radio includes a local/distant option for the auto-scan function.
By setting the radio to the 'local' scan option, weaker signals from
more distant transmitters can be ignored by the radio, making
stronger signals easier to find.
. Press the Standby button to switch on your radio.
2. If needed, press the Source button until the FM band is selected.
3. Press and hold the Menu button until the Advanced FM menu
shows on the display.
4. Rotate the Tuning control until 'Scan setting" 'shows on the display.
Press the Tuning control to enter the scan sensitivity adjustment
mode. The current setting will be marked with an asterisk.
5. Rotate the Tuning control to switch between 'Local' (Strong
stations only) and 'Distant' (All stations) options on the lower line
of the display. The Distant option will allow the radio to find weaker
signals when scanning
6. Press the Tuning control to confirm your selection. The Local or
Distant setting is stored in the radio and remains in force until
changed or until a System Reset.
GB
25