Setting The Clock; Time Format - PERFECTPRO ROCKPRO Manuel De L'utilisateur

SETTING THE CLOCK

The clock can be set when the radio is in standby mode. If no buttons are pressed for 5
seconds, the radio will exit the clock setup and the setting is cancelled.
The clock can be set in system menu. If no buttons are pressed for 30 seconds, the
radio will exit the clock setup and the setting is cancelled.
1. Press the ON/OFF button to switch on the radio.
2. Press the MENU button to display current menu.
3. Rotate the TUNING/SEEK/SELECT knob to select "System settings" and press the
knob to enter system menu.
4. Then "Equaliser" will be displayed, rotate the TUNING/SEEK/SELECT knob to
select "Time/Date" and press the knob to confirm.
5. Select "Set Time/Date" and press the knob again to enter date time settings.
6. Press the TUNING/SEEK/SELECT knob to confirm, the day flashes on the display.
7. Rotate the TUNING/SEEK/SELECT knob to set the current day.
8. Press the TUNING/SEEK/SELECT knob to confirm, the month flashes.
9. Rotate the TUNING/SEEK/SELECT knob to set the current month.
10. Press the TUNING/SEEK/SELECT knob to confirm, the year will then flash on the
display.
11. Rotate the TUNING/SEEK/SELECT knob to set the current year.
12. Rotate the TUNING/SEEK/SELECT knob to set the hour.
13. Press the TUNING/SEEK/SELECT knob to confirm, the minute digits flash.
14. Rotate the TUNING/SEEK/SELECT knob to set the minute.
15. Press the TUNING/SEEK/SELECT knob to confirm and finish the clock setting.

Time format

The time format can be select and set to either 12-hour or 24-hour format.
1. Press the ON/OFF button to switch on the radio.
2. Press the Menu button to display current menu.
3. Rotate the TUNING/SEEK/SELECT knob to select "System settings" and press the
knob to enter system menu.
4. Then "Equaliser" will be displayed, rotate the TUNING/SEEK/SELECT knob to
select "Time/Date" and press the knob to confirm.
5. Rotate the TUNING/SEEK/SELECT knob to select "12/24-hour format" and press
the knob.
6. Rotate the TUNING/SEEK/SELECT knob to select "12" or "24" hour format, then
press the knob again to confirm and finish the setting.
GB
18