PERFECTPRO ROCKHART BT Mode D'emploi page 16

Using DAB for the first time-DAB
. Straighten up the antenna.
2. Press the Standby button to switch on the radio. If the radio has
been used before the last used mode will be selected.
3. Press the Source button to select DAB mode. The display will
show "DAB Mode" for a few seconds.
4. If this is the first time the radio is used a quick scan of the DAB
Band III channels may be carried out. The display will show
'Scanning' (If the radio has been used before the last used station
will be selected instead.) During the scanning process, as new
stations are detected the station counter will increase and the
stations will be added to the list which is stored in the radio. The
bar graph indicates the progress of the scan.
5. When scanning is completed the radio will list the stations found
(in numeric-alpha order 0....9...A...Z), unless it has previously
been tuned to a DAB station. Rotate the Tuning control to scroll
through the list of available DAB radio stations. Press the Tuning
control to select the highlighted station. The display may show
'Connecting...' while the radio re-tunes. When a DAB station is
found, the display will show the station name on the upper line of
the text display and broadcast information on the lower line. Use
the Volume control to set the sound level as needed.
6. If the station list is still empty after the scan the display will show
'No DAB Station" then return to the DAB menu. If no stations
are found it may be necessary to relocate your radio to a position
giving better reception.
4