PERFECTPRO ROCKHART BT Mode D'emploi page 35

Pairing and playing your device via NFC
ROCKHART BT is equipped with wireless NFC (Near Field
Communication) feature, allowing playing NFC-enabled devices to
pair and play the music. For non-NFC devices, please refer to the
above sections for standard Bluetooth pairing.
. Turn on your NFC feature on your device. (Important: Please
make sure the screen of your playing device is on and unlocked
to allow NFC to work.)
2. Touch the NFC area of your playing device against the NFC area
marked on top right panel of your radio. The unit will switch to
Bluetooth mode and enter automatic pairing. If you pair with your
radio for the first time, your NFC-enabled device will be asked
the permission to link with the radio. Once paired with a device,
the Bluetooth icon will remain illuminated.
3. Use the controls on your device or on your radio to play/pause
and navigate tracks.
Note:
1. If you would like to link another Bluetooth device for the first time
via NFC, disconnect the existing linked Bluetooth device first.
2. The location of the NFC detection area is not the same on all
devices. When connecting with other Bluetooth device via NFC,
refer to the User guide of the other device for more information.
3. Some of metallic case or cover for mobile phones may reduce
the sensitivity of NFC. Make sure you remove it, before activating
the NFC.
GB
33