Selecting A Station-Dab; Secondary Services-Dab - PERFECTPRO ROCKHART BT Mode D'emploi

Selecting a station-DAB

. When playing a DAB radio station, the display normally shows
the name of the current station with other related information.
2. Rotate the Tuning control to access the radio station list and to
scroll through the available stations.
3. Press the Tuning control to select the desired station. The display
may show 'Connecting...' while the radio re-tunes.
4. Use the Volume control to set the sound level as needed.
Note:
If the display shows 'Service Not Available' it may be necessary
to relocate your radio to a position giving better reception. A
question-mark in front of the station name merely indicates that the
station has not recently been detected by the radio. It may still be
available.

Secondary services-DAB

. Certain radio stations may have one or more secondary services
associated with them. If a station has a secondary service associated
with it the display will show ">>" next to the station name on the
station list. The secondary service will then appear immediately
after the primary service as you press the Tuning control.
2. Press and release the Tuning control to select the station. Most
secondary services do not broadcast continually and if the
selected service is not available, the radio will re-tune to the
associated primary service.
GB
5