Philips EnergyUp Mode D'emploi page 8

10
English
- Use the appliance in vertical position with the stand in place. Do
not use it in horizontal position without the stand or cover it, as
this might cause the appliance to overheat.
- Do not place heavy objects on the appliance, the adapter or the
cord.
- Do not use the adapter in or near wall sockets that contain or have
contained an electric air freshener to prevent irreparable damage
to the adapter.
- When you remove the adapter from the wall socket, do not pull at
the cord but grasp the adapter directly to avoid cord damage.
- When you remove the small plug from the appliance socket, do
not pull at the cord but grasp the small plug directly to avoid cord
damage.
- The appliance has no on/off switch. To disconnect the appliance,
remove the plug from the wall socket. The adapter must remain
easily accessible at all times.
Safety and compliance
- This Philips appliance complies with all applicable standards and
regulations regarding exposure to electromagnetic fields.
- This is a Class IIa medical appliance. It meets requirements of
Medical Device Directive MDD 93/42/EEC and 2007/47/EC for
medical appliances.
- This is not a general illumination product.
Electromagnetic compatibility (EMC)
Portable and mobile radio frequency communication equipment,
such as mobile phones, cordless telephones and their base stations,
walkie-talkies, and wireless home network devices (routers), can
affect the Philips EnergyUp. They must therefore not be used in close
proximity to the EnergyUp. If this cannot be avoided, the EnergyUp
must be observed to verify normal operation. If abnormal
performance (e.g. loss of functionality, light inconsistency, flicker) is
observed, additional measures may be necessary, such as re-
orientation of the radio frequency communication equipment or the
EnergyUp (see section 'EMC information' in chapter 'Specifications' for
more details).