Multiplex HiTEC X2-700 Multi-Charger Mode D'emploi page 52

Hochleistungs Profi Balance
LADER / ENTLADER
15. Maximum Circuit Power Chart (per Output)
Battery No. of Cells
Type
LiHV 2S
3S
4S
5S
6S
7S
8S
Pb
The amount of charge current feeding the battery is
automatically limited to a maximum of 700 Watts per
channel. The maximum discharge power is approximately
25 watts per watts per channel and is limited by charger's
internal thermal sensor for maximum discharge current.
52
Rated Max. Charge
Voltage (V) Voltage (V)
7,4 8,7
11,1 13,05
14,8 17,4
18,5 21,75
22,2 26,1
25,9 30,45
29,6 34,8
6,0 7,4
8,0 9,8
10,0 12,3
12,0 14,8
14,0 17,2
16,0 19,7
18,0 22,1
20,0 24,6
Professional Balance Charger, Discharger
Charge Current (A)
Charging Power 400 W
30,0
30,0
30,0
30,0
26,8
22,9
20,1
20,0
20,0
20,0
20,0
20,0
20,0
18,0
16,0
If the internal temperature reaches more than 80° C (176° F),
the chargers processes will automatically stop and the „INT.
TEMP. TOO HI" will show on the LCD. To avoid overheating
your charger and causing damage please refer to the following
chart for the maximum charging/discharging current.
Discharge Current (A)
Discharging Power 25 W
3,4
2,2
1,7
1,3
1,1
0,9
0,8
3,4
2,5
2,0
1,7
1,5
1,3
1,1
1,0