Load Data Program - Multiplex HiTEC X2-700 Multi-Charger Mode D'emploi

Professional Balance Charger, Discharger
13. Save Data Program
NiMH CYCLE
DCHG>CHG
DEC INC
Start/Enter > 3 seconds
SAVE PROGRAM

13.1. Load Data Program

[ BATT MEMORY 1 ]
NiM H 14.4 V
Start/Enter
LOAD [01]
14.4V 3000mAh
Start/Enter > 3 seconds
ENTER CHARGER
LOAD
3
DEC INC
SAVE
NiMH
Hochleistungs Profi Balance
LADER / ENTLADER
Set up the charge/ discharge sequence and cycle number.
Once you have completed the setup procedures press and
hold the „START/ENTER" key for 3 seconds to save the
data.
This program is designed to load the data stored in the
"save data" program. To get to the save data screen press
the „BATT. TYPE/ STOP" button until you see the Load
Data screen. Press the „START/ENTER" key to make the
data fi eld blink and press the „INC" or „DEC" keys for at
least 3 seconds to load the data.
Choose the data number you want to call back. The data
you want to call back will be displayed.
Load the data.
49