Professional Balance Charger, Discharger
2.3. Recommended Accessories
# 118 339 8S Universal Balancer Board
# 118 374 Transmitter Charging Cable
OPTIC 5 & 6 Sport / AURORA 9
# 9 2516 Charging Cable MPX
3. Special Features
The HiTEC X2-700 allows you to charge up to two different
batteries simultaneously. The charger will automatically
charge all 2 batteries at a time to their maximum capacity.
Additionally the batteries being charged do not need to
have the same confi guration or the same chemistry. Therefore
you can connect any one of a NiMH/NiCd/LiPo/LiFe/LiHV/
LiIon battery into any of the charging ports. This eliminates
the time consuming efforts of charging all your batteries
separately.
Optimized Operating Software
The software in X2-700 automatically controls the current
rate during the charging or discharging process. This feature
can prevent the user from overcharging their batteries which
could lead to damage or injury. If the charger detects a
malfunction, the circuit automatically disconnects and an
alarm will sound. The operating functions of the X2-700
# 118 333 Temperature Sensor Cable
# 9 2517 Charging Cable Deans Connector
# 118 331 Charging Cable XT 60
are controlled through a two-way communication link in
order to maintain maximum safety with minimal errors.
All of these functions and settings are easily confi g-ured
by the user.
Internal Independent Lithium Battery Balancers
Each channel of the X2-700 employs an individual-cell
voltage balancer eliminating the need for an external
balancer for balance charging.
Monitors Individual Cells During Battery Discharging
During the process of discharging, the X2-700 can monitor
and display each cell of lithium type batteries individually.
If the voltage of any single cell is abnormal, an error message
will display and the discharge process will automatically end.
Hochleistungs Profi Balance
LADER / ENTLADER
# 8 6020 Transmitter Charging Cable MPX
T
itt Ch
(Diode plug)
# 299 071 Charging Cable Traxxas
# 299 071 Charging Cable Traxxas
i
C b
35