Multiplex HiTEC X2-700 Multi-Charger Mode D'emploi page 28

Hochleistungs Profi Balance
LADER / ENTLADER
Content
1. Introduction ........................................................... 28
1.1. Warnings and Safety Information .......................... 29
1.2. Guarantee and Limitation of Liability ..................... 32
1.3. CE Conformity Declaration .................................... 32
1.4. Disposal Notes ....................................................... 32
2. Package Contents .................................................. 33
2.1. Specifi cations ........................................................ 33
2.2. Charger Layout ...................................................... 34
2.3. Recommended Accessories .................................... 35
3. Special Features ..................................................... 35
4. Powering the Charger ............................................ 37
4.1. Connecting the Battery .......................................... 37
4.2. Connecting the Balancer Socket ............................ 37
5. Program Flow Chart .............................................. 38
6. Default User Preferences Setup .............................. 39
7. Charging Lithium Chemistry Type Batteries ........... 42
7.1. Discharging Lithium Chemistry Type Batteries ....... 44
7.2. Error Message Display ........................................... 45
1. Introduction
Congratulations on your purchase of the HiTEC X2-700
Multi-Charger. You are now the owner of a compact multi
chemistry battery charger with battery management and
integral Lithium battery balancing features.
The X2-700 features two totally independent and identical
700 watts charging circuits for a total power of 1400 watts.
As a result, it can simultaneously charge or discharge up to
2 separate battery packs.
The X2-700 can be attached to a 12 volt car battery. With
the include connector you connect it to a 11-30 V DC power
supply with a minimum amperage rating of 60 amps.
28
Professional Balance Charger, Discharger
8. Charging NiCd or NiMH Batteries .......................... 45
8.1. Discharging NiCd or NiMH Batteries ..................... 46
8.2. Charge/Discharge Cycling of
NiCd/NiMH Batteries ............................................. 46
9. Charging/Discharging Lead-Acid (Pb) Batteries ..... 46
9.1. Charging Lead Acid (Pb) Batteries .......................... 47
9.2. Discharging Lead Acid (Pb) Batteries ..................... 47
10. Synchronous Mode ................................................ 47
11. Battery Resistance Meter ....................................... 48
12. Battery Storage ...................................................... 48
13. Save Data Program ................................................ 48
13.1. Load Data Program ................................................ 49
14. Warning and Error Messages ................................. 50
15. Maximum Circuit Power Chart (per Output) .......... 51
The HiTEC X2-700 is simple to use, but the operation of a
sophisticated automatic charger such as the X2-700 does
require some knowledge and education by the user.
This instruction manual is designed to ensure that you can
quickly become familiar with the charger's functions and
capabilities. It is important that you read this instruction
manual in its entirety before attempting to use your new
X2-700 charger.