Multiplex HiTEC X2-700 Multi-Charger Mode D'emploi page 36

Hochleistungs Profi Balance
LADER / ENTLADER
3. Special Features
Charges Most Popular Lithium Batteries
The X2-700 is compatible with the four most common
Lithium chemistry batteries, LiIon, LiPo, LiHV and LiFe.
Multiple Lithium Battery Charge Modes
The X2-700's programming allows for Fast Charge, Balance
Charge or Storage Charge Modes for LiPo, LiHV, LiIon and
LiFe batteries.
Fast Charge Mode: Reduces charging time, but does not
balance the cells, this mode only charges the battery to
approximately 90% capacity.
Balance Charge Mode: Monitors individual cell voltage,
keeping the cells within an acceptable voltage range and
charges the pack to peak capacity.
Storage Charge Mode: Used for long-term battery storage.
Adjusts the voltage level so the battery will not be damaged
during long term storage.
Delta Peak Technology for Maximum Safety
The automatic charge termination program utilizes Delta-Peak
voltage detection. When the battery's voltage exceeds the
threshold, the charge process is terminated automatically.
Automatic Charging Current Limit
The maximum charge rate can be manually set when
charging NiCd or NiMH batteries. The X2-700 will auto-
detect when the batteries are fully charged and shut off,
even with low impedance NiMH packs.
Capacity and Processing Time Limit
The charging capacity is calculated as the charging current
multiplied by time. If the charging capacity exceeds the
maximum limit set by the user, the process will terminate
automatically. Additionally the user can set the maximum
amount of charging time. If the charging time exceeds this
limit, the process will terminate automatically.
36
Professional Balance Charger, Discharger
Temperature Threshold*
The battery's internal chemical reaction causes the
temperature of the battery to rise during the charging
process. If the temperature exceeds the limit, the charging
process will automatically terminate.
* This function is available by connecting an optional
temperature probe, which is not included in our package.
10 User Customizable Presets per Port
Each port of the X2-700 features 10 individually customizable
presets so the user can store the charge and discharge
parameters for any particular battery type. These presets
can be recalled for the desired battery type without the
need for any additional programming.
Cyclic Charging/Discharging
Batteries can be set to automatically Charge/Discharge or
Discharge/Charge up to a maximum of 5 cycles.
PC Based Analysis Using USB Communication*
The HiTEC X2-700 offers a PC-based program which can
analyze the characteristics of the battery via a USB port.
It shows a graph of voltage, current and capacity curves.
It also displays the individual voltage of each cell in the
lithium battery pack.
* Using optional PC-LINK USB Adapter (sold separately)
and software that can be downloaded from
www.multiplex-rc.de.
Synchronous Mode
When charging two same batteries, both charging channels
can be set by channel one.
Battery Internal Resistance Meter
The user can check each cell's internal resistance.