Guarantee And Limitation Of Liability; Ce Conformity Declaration; Disposal Notes - Multiplex HiTEC X2-700 Multi-Charger Mode D'emploi

Hochleistungs Profi Balance
LADER / ENTLADER

1.2. Guarantee and Limitation of Liability

MULTIPLEX Modellsport GmbH & Co.KG does not assume
any liability for loss, damage or costs which arise through
the improper use and operation of our products, or which
are connected with such operation in any way. As far as is
legally permissible, the obligation of MULTIPLEX Modellsport
GmbH & Co.KG to provide compensation for damages, on
whatever legal basis, is limited to the invoice amount of the
quantity of MULTIPLEX Modellsport GmbH & Co.KG goods
that were directly affected by whatever incident gave rise
to the damage. This does not apply if MULTIPLEX Modell-
sport GmbH & Co.KG is obliged to accept unlimited liability
in accordance with mandatory law for deliberate or gross
negligence.
Our products are covered by the currently valid statutory
guarantee regulations. If you wish to make a claim under
guarantee, please contact the model shop where you
purchased the product.
The guarantee does not cover malfunctions caused by the
following:

1.3. CE Conformity Declaration

This device has been assessed and approved in accordance
with European harmonised directives. This means that you
possess a product whose design and construction fulfi l the
protective aims of the European Community designed to
ensure the safe operation of equipment.

1.4. Disposal Notes

Electrical equipment marked with the cancelled waste bin
symbol must not be discarded in the standard household
waste; instead it should be taken to a suitable specialist
disposal system.
In the countries of the EU (European Union) electrical
equipment must not be discarded via the normal domestic
refuse system (WEEE - Waste of Electrical and Electronic
Equipment, Directive 2002/96/EG).
32
Professional Balance Charger, Discharger
· Improper Operation
· Maintenance that was performed incorrectly, late or not
at all, or performed by a non-authorized body
· Incorrect connections
· Use of non-original MULTIPLEX accessories
· Modifi cations / repairs that were not carried out by
MULTIPLEX or a MULTIPLEX Service Centre
· Accidental or deliberate damage
· Faults due to normal wear and tear
· Operation outside the technical specifi cations or in
connection with components from other manufacturers.
MULTIPLEX Modellsport GmbH & Co.KG
Westliche Gewerbestraße 1
D-75015 Bretten-Gölshausen
Multiplex/HiTEC Service:
+49 (0) 7252 - 5 80 93 33
You can take unwanted equipment to your nearest local
authority waste collection point or recycling centre. There
the equipment will be disposed of correctly and at no cost
to you.
By returning your unwanted equipment you can make an
important contribution to the protection of the environment!