Maintenance Plan; Standard Delivery - Solo 417 Instructions D'emploi

10 Maintenance plan / 11 Standard delivery
Entire pressure sprayer
Hoses and their screw
connectors
Spraying agent tank
Nozzles and filter
element
Filling strainer
Cap gasket
Rechargeable battery (
Never start working if there are any irregularities or leaks, if you can see any damage to the equipment
(including the support frame), if any of the adjustment settings are incorrect or if the equipment is not
working properly in any way. In this event have the device checked by an autorised SOLO workshop.
If you have any questions please refer to your authorised SOLO dealer.
 Standard device with shut-off valve assembled on the high-pressure hose
 Spray tube
 Nozzle attachment including O-ring (10x2 mm)
 Charger with EURO plug and 3 mains plug adapters for different countries
 Sticker for the spraying agent tank: herbicide, fungicide and insecticide
 These operating instructions, the EC declaration of conformity on a separate piece of paper
ENGLISH 16

10 Maintenance plan

Check whether the device is safe to use:
 Visual inspection of the device
 Check the tightness of all equipment compo-
nents (at maximum permissible pressure with
open and closed shut-off valve)
 Check the function of all active components
(shut-off valve, pump toggle switch, pressure
gauge (depending on the model))
Visual inspection
Visual inspection
Clean (section 9.8)
Clean (section 9.8)
Trial run to check the spray nozzles and the filter
element by measuring the delivery rate
(section 9.3)
X*: A monthly trial run is required only if the
device is used frequently.
Visual inspection
Clean (section 9.8)
Grease (section 9.7)
Recharge (section 6.3)

11 Standard delivery

X
X
X
X X
X X X
X X* X
X
X X X
X X
X X