Safety During System Maintenance; Pump Identification; Technical Characteristics - Pratissoli KF Série Manuel D'utilisation Et D'entretien

9. The high pressure system must not be started up and run
under pressure without all team members in position and
without the Operator having already directed his/her lance
toward the work area.
3.5

Safety during system maintenance

1. High pressure system maintenance must be carried out
in the time intervals set by the manufacturer who is
responsible for the whole group according to law.
2. Maintenance should always be performed by trained and
authorised personnel.
3. Assembly and disassembly of the pump and the various
components must only be carried out by authorised
personnel, using appropriate equipment in order
to prevent damage to components, in particular to
connections.
4. Always only use original spare parts to ensure total
reliability and safety.
5

TECHNICAL CHARACTERISTICS

Model Rpm
KF 28 1000
KF 30 1000
800
1000
KF 32
KF 36
900
1000
KF 40 900
4
Each pump has its own Serial No. XX.XXX.XXX see pos.  and
an identification label, see pos.  of Fig. 1 which shows:
- Pump model and version
- Max revs
- Absorbed power HP - kW
- Pressure bar - P.S.I.
- Flow rate l/min - Gpm
Flow rate
l/min Gpm
92.4 24.4
106 28
122 32.2
120 31.7
137 36.2
153 40
170 45
21

PUMP IDENTIFICATION

Model, version and serial number must always be
indicated when ordering spare parts
Pressure
bar psi
210 3045 36.8
200 2900 40.4
160 2300
180 2610 41.2
140 2050
130 1900 38.2
110 1600
Fig. 1
Power
kW HP
50
55
37 50
56
37 50
52
36 49