Operating Instructions - Trotec B025: Notice D'emploi

05. oPeratInG InstructIons

Powering on and off
• Keep the on/off key pressed for approx. 3 seconds to
power the device on or off.
Videomodus
• Powering on/off: Keep the video key pressed for 3
seconds to get to the video mode. The flashing video
mode symbol appears in the top left-hand corner of
the display during recording.
The free memory is shown in the bottom left-hand
corner. Press the video key again for approx.
3 seconds to stop the video sequence. Video
Explorer can be used to watch and process the
videos.The free memory is shown in the bottom
left-hand corner. Press the video key again for
approx. 3 seconds to stop the video sequence.
Video Explorer can be used to watch and process
the videos.
Symbol for
backlit display
Image depiction
during while photo
is being taken
Shows the actual
memory status
Changing the brightness of the LEDs
• Press the "BRIGHT +" key repeatedly in Video mode
to gradually increase the brightness and the
"BRIGHT -" key to progressively lower the bright-
ness whereby "10" is the highest brightness level
and "0" is the lowest . The LEDs go out all together
when the brightness level on the BO25 is set to "0".
B - 5
Image inverter
• Press the < key or the > key in video mode to
invert the image by180°.
Photo
• Press the "Camera Symbol" key briefly to save
images in camera mode. (Activate the Time/Date
function (see section "Time/Date") to add the time
and the sate to your photos).
System Settings/Menu Mode
• Press the "OK" key to open the next dialogue box in
Video mode.
Shows time
and date
• Press the < key or the > key to move the cursor on
to the "Yes" box and press the "OK" key to access
the system menu.
Operating Manual – Mini-Videoscope
Current time and
memory card
symbol
Main menu
Main menu with
corresponding
functions
EN