Trotec B025: Notice D'emploi page 19

Image Settings
• In order to ascertain the optimal settings, press the
Photo key ( ) and the Video key ( V ) to increase or
lower the value. The following settings can be adjusted.
• Brightness • Contrast • Colour • Satuartion
EN
Videos
Images
Operating Manual – Mini-Videoscope
The factory preset parameters can be restored by
confirming 'default' (pre-setting). Press the 'OK' but-
ton to save the settings or the 'ESC' (escape) button
or 'EXIT' to return to video mode.
Energy saving mode
• The time after which the display changes to the
energy saving mode can be set here. The display
switches off, while the main menu is retained in the
background. Briefly pressing a button suffices to
switch the display on again and to return to menu
mode. This function is active only in menu mode.
It does not work in video mode or when searching
through and viewing image files.The energy saving
mode preserves the videoscope's energy reserves,
thereby extending the intervals between charging
procedures.
The setting may need to be made again if the equip-
ment has been switched off completely.
B - 8