Team BBA 7 Mode D'emploi page 35

Fax +32 2 359 95 50

Loaf rises then falls
 The flour is too fine.
Loaf rises too much
 You used a wrong type of yeast.
 You forgot to add salt.
Loaf does not rise enough
 The flour is too old.
 The flour does not contain enough gluten.
 The flour is too fine.
 You used a wrong type of yeast.
 You put too much salt.
Flat loaf, little to no rising
 The liquid is too hot/cold.
The flour is too old.

 The flour does not contain enough gluten.
 The flour is too fine.
 You forgot the yeast.
 The yeast is too old.
 You used a wrong type of yeast.
 You put too much salt.
 You forgot to add salt.
If the ingredients are only partially mixed
 The flour is too fine.
If the loaf texture is heavy or dense
 You used a wrong type of yeast.
CLEANING AND CARE
Unplug the appliance and let it cool down before cleaning.
1. Baking tin
Take the baking tin out of the appliance before cleaning. Never immerse the tin in water
or any other liquid. Clean the inside and outside with a damp cloth. If necessary, use
soapy water to clean the inside of the baking tin. Never use scratching or abrasive
objects, as they would damage the non-stick coating of the baking tin. After a while, the
appearance of the non-stick coating might change because of the steam and humidity.
This is normal and does not affect the features and quality of the coating.
2. Kneading blade
Clean the kneading blade with a damp cloth. If the kneading blade is difficult to detach,
pour some hot water in the baking tin and wait for a few minutes. Hot water will release
the connection of the kneading blade. If the hole of the kneading blade is obstructed,
clean it with a toothpick, making sure not to scratch the blade.
3. Lid with window
To make the cleaning easier, you can detach the lid. To do so, open it and slide the lid
upward. Clean it with a damp cloth. Never immerse it in water or any other liquid.
4. Inner case
If necessary, you can also clean the inner case. There too, only use a damp cloth. Make
sure the inner case has totally cooled down before cleaning it. Make sure it is totally dry
before switching on the appliance.
5. Housing
Clean the housing of the appliance with a damp cloth. Never immerse the appliance in
water or any other liquid.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don't change the page numbering. Keep the
language integrity.
35
Assembly page 35/144
TEAM BBA 7 – 060329