Leica DMIL Mode D'emploi page 24

Self-adhesive scales to determine the coodinate
adjustment have been included with the
brackets.
• Attach these in the recesses on the specimen
controller.
Attaching the stage expansion
• Attach the stage expansions to the right or left
side or to both sides of the stage (22.3).
• Mount the stage expansion with a 3 mm fixed
spanner.
Inserting the specimen brackets
• Insert the specimen brackets into the four
holes provided in the stage opening for this
purpose (22.2).
Fig. 24 Specimen stage with expansions attached
24
Selecting the mains voltage and connecting the
microscope to the mains supply
Attention!
Do not plug in the mains plug of the
microscope and of the power unit* before all
the options are assembled.
The mains plug may only be inserted into a
grounded socket. The protection must not be
jeopardised by using an extension cable
without ground conductor.
Fig. 25
1 Fuse holder with voltage selector module, 2 Latch, 3 Voltage
selector module, 4 Mains voltage, 5 Mains connection
5 2
3 4
1