Leica DMIL Mode D'emploi page 21

Proceed as follows:
• Unscrew the lock screw on the tube changer
(16.1) using a 3 mm fixed spanner.
• First place the IL/L tube adapter (17.1) into the
tube holder of the microscope.
• Retighten the lock screw.
• Unscrew the lock screw on the IL/L tube
adapter (17.2).
• Place a tube into the tube holder of the tube
adapter.
• Retighten the lock screw.
• To set a new viewing position, loosen the lock
screw (17.2), rotate the tube as desired and
retighten the lock screw.
Note
For mounting a drawing facility*, a multi-
discussion tube*, a magnification changer* or
an ergo module*, please refer to chapter
"Setting up the options".
Fig. 18 HC L1T tube
Fig. 16
1 Lock screw, 2 Tube holder, 3 Tube
2
1
Fig. 17
1 IL/L tube adapter, 2 Lock screw
2
1
Fig. 19 HC L1VT tube
3
21