Operation; Basic Settings For Transmitted Light - Leica DMIL Mode D'emploi

Operation

Attention!
Be especially careful when making exami-
nations which involve the use of acids or
other aggressive chemicals. Avoid direct
contact of these substances with optical
and mechanical parts.
Basic setting for
transmitted light
Switching on the 6 V/35 W halogen lamp
• Switch on the 6 V/35 W halogen lamp with the
power switch (43.2) (position I = On).
• Adjust the brightness with the rotary knob
(43.1).
Adjustment specimen
For the initial adjustment of the microscope it is
recommended to use a specimen that contains
areas of high and low contrast.
For incident-light fluorescence of transparent
objects, adjust in transmitted light first.
Fig. 43
1 Brightness adjustment knob, 2 Power switch, 3 Focusing
mechanism
2
1 3
39